I had this problem and it turned out to be a dirty park switch located in the console shift (automatic), that releases the ignition in park. The mech cleaned it and the problem never returned.
this is caused by ignition lock cylinder failure, you will have to replace the ignition lock cylinder and key.
how to remove key stuck in ignition switch in Chevy colbalt
if you can find a really strong magnet or a vacuum with a small nozzle to suck air threw and pull it out
remove battery cable
To remove a key that is stuck in the ignition on a Peugeot 406 HDI, make sure that the car is in park. Then try to remove the key. If this does not work, spray the ignition mechanism with WD-40 after pulling out the key as far as possible. Then work the key in and out until it comes out.
To effectively remove a stuck key from a lock, try using lubricant like WD-40 or graphite powder to loosen it. Gently jiggle the key while pulling it out to avoid breaking it. If the key remains stuck, seek help from a locksmith to prevent damage to the lock.
To remove a stuck key from your keyboard, gently pry it up using a small tool like a flathead screwdriver or a keycap puller. Be careful not to damage the key or the keyboard while doing so. If the key is still stuck, you may need to clean the area around the key or consider replacing the key or the entire keyboard.
Yes
Use the opportunity to replace the ignition. Key needs to be in On position for removal.
To remove a stuck key from a lock, try using lubricant like WD-40 or graphite powder to loosen it. Gently jiggle and wiggle the key while pulling it out. If that doesn't work, seek help from a locksmith.
To remove stuck pedals using an allen key, first, insert the allen key into the pedal spindle. Then, turn the allen key counterclockwise to loosen the pedal. If the pedal is still stuck, apply lubricant to the threads and try again. Repeat the process until the pedal is successfully removed.
yes, need it to start the car.