The tank should be drained before removal. The fuel must be drained into an approved container.
Your fuel pump is inside your fuel tank. To replace it you have to remove the fuel tank and remove the access plate on the top of the tank. Full directions are in Chilton's at your local library.
It is in the fuel tank. You have to remove the tank to accessIt is in the fuel tank. You have to remove the tank to access
Remove fuel tank from vehicle and then remove fuel pump from tank.
You have to remove the fuel tank.You have to remove the fuel tank.
Follow the fuel lines from the front to the fuel tank. The fuel pump is connected to the tank. You'll have to remove the tank to remove the pump. Follow the fuel lines from the front to the fuel tank. The fuel pump is connected to the tank. You'll have to remove the tank to remove the pump.
to remove the fuel pump you will have to remove the fuel tank as it is located inside the fuel tank
Unhook fuel fill spot, remove plastic tank cover, unhook tank support brackets Remove the fuel tank and there is a a ring on top of the fuel tank. Unhook the fuel lines and wires, remove the ring. Pull the pump assembly out. Install in reverse order. Also you can just take of the pickup box off. Removing the box is faster if you fuel tank is full.
to remove the tank, first thing u need to do is try to use as much fuel from tank as possible remove spare wheel then if you have a floor jack ,u need to support the tank there are 2 straps that support the tank u need to remove bolts that hold these straps disconnect fuel filler hose from tank disconnect fuel supply line from tank disconect fuel gauge wire lower fuel tank on jack ps there are fuel additives you can buy that will remove water from the fuel and tank also a nother way to do this is add about 1/2 gallon of gasoline to full tank of fuel the gasoline will burn off water when it burns in fuel with normal use
The fuel filter is part of the fuel pump module in the fuel tank. You will have to remove the tank to access.The fuel filter is part of the fuel pump module in the fuel tank. You will have to remove the tank to access.
You have to remove the fuel tank to access the pump.You have to remove the fuel tank to access the pump.
First remove gas cap, then disconnect exhaust from flange by fuel tank. Disconnect fuel pump electrical connection, disconnect fuel filler hose and evap line from top of tank. Disconnect quick connect fittings on top of tank. Lower tank. This procedure should be done with the tank less then 1/4 full.
Remove the fuel lines. Drain the fuel from the fuel tank. Remove the retaining straps. Reverse the process to install the new fuel tank.