Ask a Mechanic or person who works on cars
How do I get the starter out after I dropped it
how do i remove the starter motor Mazda rx8
The starter for the 1992 Isuzu Trooper was a little difficult to locate, honestly. One may find it on the driver's side of the motor, directly above the oil pan.
how to remove starter motor on bmw 745
how to remove starter motor for Peugeot 206 1.4 hdi.
How do i remove an Audi A6 Starter motor
Disconnect battery, remove electric wires from starter, remove mounting bolts, install new part in reverse sequence.
disconnect battery. from underneath disconnect solenoid wire and battery cable from starter solenoid. remove starter motor bolts. remove starter motor. installation is the reverse but be sure to place the starter shim between the starter motor and the engine or you will get noise during starts.
To replace the motor you start by removing the exhaust or you can undo the mount and lift out the motor. Consult owners manual for additional information.
# Disconnect the negative battery cable # Remove the air intake duct and the air cleaner assembly # Disconnect the speedometer cable from the transaxle # Unscrew the nut and disconnect the battery cable from the starter motor then disconnect the wiring from the solenoid # Remove the starter motor mounting bolts,supporting the starter motor as the bolts are removed and remove the starter motor
# Disconnect the negative battery cable # Remove the air intake duct and the air cleaner assembly # Disconnect the speedometer cable from the transaxle # Unscrew the nut and disconnect the battery cable from the starter motor then disconnect the wiring from the solenoid # Remove the starter motor mounting bolts,supporting the starter motor as the bolts are removed and remove the starter motor
To remove the starter motor, disconnect the battery first. Take a picture, if possible, so that the new starter can be put back in place the same as the old one was. Disconnect the wires and remove the starter bolts. Remove the starter and replace with a new one. Hook up the wires and the battery.