you need a tacoma wheel bolt wrench or some plastc expolsive.
Remove the lower bolt from under the truck. Remove the upper bolt by removing the left front wheel and getting to it though the wheel opening. Not easy, I just changed the one on my 2.7 Tacoma last year.
The wheel bolt diameter for a 2007 Toyota Tacoma is 12mm x 1.50.
Toyota uses metric system.
You will need to jack up passenger side and remove passenger front wheel. From above remove belt tension bolt. underneath remove bottom bolt, disconnect wiring. wiggle out from above.
Simply remove the rear tire of which ever side youre working on then remove the bolt that connects to the knuckle then remove the bolt from the other side of the toe link close to the middle of the differential
It has a 6 lug bolt pattern but yes you can if the wheel has the correct bolt pattern. It has a 6 lug bolt pattern but yes you can if the wheel has the correct bolt pattern.
Disconnect battery. Remove air bag. Remove bolt holding steering wheel to column. Use a steering wheel puller to remove wheel from column.
To remove the steering wheel on a 1984 Mercedes 300 you first need to remove the Mercedes logo in the center of the wheel to access the bolt holding the wheel in place. A 10mm allen socket with a 6-inch extension is needed to remove the bolt.
6x139.7
5x114.45
what is the lug/bolt pattern for a 2000 ford ranger?
8x170mm