To remove the steering wheel on a 1984 Mercedes 300 you first need to remove the Mercedes logo in the center of the wheel to access the bolt holding the wheel in place. A 10mm allen socket with a 6-inch extension is needed to remove the bolt.
All you need is a 10mm allen socket with a 6" extension. remove that bolt and the steering wheel pops off. Yo uonly needed to remove the Mercedes logo in center of horn to access that bolt.
It is behind the instrument panel - you must remove the steering wheel, then the instrument cluster to get to it
you dont let a pro do it
Should be in the engine compartment right up against the firewall, (directly behind the steering wheel).
Hey its really easy u just take that BMW cap off the middle of the steering wheel and there is a nut inside you just take that off and pull
Underneath the steering wheel... remove the rwo screws and the plastic base comes down... then you will see the fuse box... Underneath the steering wheel... remove the rwo screws and the plastic base comes down... then you will see the fuse box...
If your talking about the locking ring (it looks like it has teeth) there is a tool you can buy at most auto parts stores,its real chep.
I am not sure this is the trouble, if you remove the cover on the steering wheel there will be a large nut if this nut is tight the splines on the wheel could be bad, might be looking at replacing the column, or the steering wheel. I the nut is loose simple tighten and replace cover.
Remove steering wheel Remove Steering lock plate Place ignition in on position Depress lock pin now exposed. If this is not possible, drill out lock pin.
It is important to have everything in the steering wheel column in its correct place. A diagram for the 1984 Grand Prix steering wheel column can be found in its maintenance manual.
Remove the steering wheel, the snap ring and plate, the signal light switch, and you will find the bolt that holds the lock cylinder
u need a steering wheel puller and pull steering wheel and all turnsignal parts. one screw holds it in