0
it's not easy unless you have done it before.if you look closely there is an clip that holds the the crank handle on a spline.there is a recessed part of the crank handle,by using a small screwdriver you can pry the clip toward you,use caution and safety glasses,with a few trys you will grasp the technique needed to remove it.note:you may need a flashlight to see the end of the clip.a pocket screwdriver worked the best for me.
What else can I help you with?
How do you remove the window crank on a 1998 dodge neon?
Pull out the U-clip located on the base of the window crank.
How many gallons of gas can a 1998 Toyota Tacoma hold?
15.9 as listed on window sticker.
How do you remove the window crank on a 1998 Plymouth breeze?
It is held in place by a horseshoe shaped clip. the clip is removed by reaching behind the handle with a small pick and pulling the clip out.
How do you remove the door panel of 1998 Toyota Tacoma?
Call an Auto body guy
How do you remove passenger side window crank handle on a 1998 hyandai elantra?
There is a clip holding the handle. It is located in the center in the back of the handle. There is a tool to remove & install it; but you can use a flat screwdriver carefully. Good luck.
How do you remove a window crank on a 1998 Chevy S10 pickup?
There is a "C" clip behind the handle that must be removed. Your local auto parts store can sell you an inexpensive tool to help you remove the clip without damage done.
How do you remove the door panel from a 1998 Elantra?
1. On manual window models remove the window crank handle dislodge the clip 2. Remove the outside mirror cover 3. Detach the door handle trim piece and disconnect the door pull mounting screw. Unplug the electrical connector from the power window switch 4. Remove the retaining screws and detach the panel by carefully prying it away from the door
How do you remove a manual window crank from the door panel in the door of a 1998 Chevy s10?
Your local auto parts store will sell you an inexpensive tool to do that job. There is a spring clip that has to be removed from behind the handle.
Remove window crank handle from 1998 Chevrolet 1500?
If it doesn't have a screw in the center--if may be secured by a horse shoe type clip behind handle--tool available at auto parts store
Where is the inertia switch on 1998 Toyota Tacoma?
There is no inertia switch on a 1998 Toyota Tacoma..
Replacing a back window on a Monte Carlo?
How do I remove the back window in a 1998 Monte Carlo? how do I replace this?How do I remove from other Car's model
1998 Tacoma computer location?
above the glove box, shouldn't need to remove the dash just the glove box.
