Crush the gasket piston and rub herbs into escape valve B until click is heard and colour changes to coppery green. Stop if combustion occurs in tubular motor crosshatch.
you have to drill out the rivets
4 Cylinder 2.4liter DOHC
power window motor removal 93 sunbird
THIS IS ALL I HAVE, MABE IT WILL GET THE BALL ROLLING FOR YOU..BUT YES GET A USED MOTOR IF NOTHING ELSE WORKS. YOU GONNA NEED THAT WINDOW.. lower window to down position(if you can) remove door panel remove window weather stripping remove black window surround (should be a screw on top of surround towards back edge) then stationary window should unbolt then remove pins that hold operator to track pick up and pull out the operating window
THIS IS NOT A EASY JOB . YOU HAVE TO PULL THE DOOR PANEL AND THEN REMOVE THE ENTIRE WINDOW ASSM. WITH THE MOTOR. NOT A JOB FOR THE AVERAGE PERSON. SUGGEST A DEALER OR REPAIR SHOP it is actually really easy remove the screw and pop off the door panel have the window rolled up then have a piece of PVC pipe and or another person hold the window that the motor out and install the new ones make sure the other person holds the window while you test
Power window amp in the drivers side door. If you remove the door panel its a little black box toward the door latch with 8 wires coming out of it.
i am going to be doing this this weekend....this is how my chilton says to do it lower window to down position(if you can) remove door panel remove window weatherstripping remove black window surrond(should be a screw on top of surrond towards back edge) then stationary window should unbolt then remove pins that hold operator to track pick up and pull out the operating window
You will have to remove the door panel and replace the regulator assembly. In some cases it comes as an assembly with the motor.
engine model of the 1993 Nissan 240sx is the ka24de in the USA. in japan it is the sr20det.
Remove the wiring harness from the back of your 1993 Chevrolet Camaro blower motor. Remove the blower motor retaining nuts. Remove the fan from the front of the blower motor. Reverse the process to install the new blower motor.
Most likely the motor in the car is broken. You will need to remove the door panel in order to see if it is off track or if the motor is broken.
You remove it out the top.