Want this question answered?
Green
Remove the wiring harness from the back of your 1989 Toyota alternator. Remove the alternator retaining bolts. Remove the alternator belt. Reverse the process to install the new alternator.
Begin by removing the alternator belt on your 1989 Chevy Corsica. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
Remove passenger side Rack and pinion arm and slide out Alternator .
It Doesn`t Have One. It Is Built Inside The Alternator.
Most vehicles made before 1994 use R-12 refrigerant.
Not sure if 1991 and 1989 is sameNot sure if the alternator is under your right front seat on a 1989 model, but it is on 1991. You need to remove the seat and the top under the seat to get proper access. When that is done, it is easy removal of the alternator. You will see that the alternator is self explainable.
Work inward in a circular motion.
It is on the back of the alternator, Disconnect the Battery first!. There is a small module on the back of alternator remove and replace.
If it is like a 1989 saab 9000, you remove the front passenger wheel, remove all the plastic from the wheel well, and the alternator should be rite there. You can also get to it by removing the manifold, which allows much easier access to the alternator, but then you need a new manifold gasket.
basically just remove the bolts holding it up, disconnect the harness, remove and replace!
Disconnect the negative battery cable. There are two wires connected to the alternator remove them. Then remove the left drive axle or remove the left engine mount,place a jack under the ol pan, raise and support the engine. This will provide te space to remove the alternator because it is very difficult to remove it from the top side of the engine.Loosen the alternator bolts, slacken the belt, then alternator can now be removed from the space created.