just remove the clips at each end of the hoses and the screws and that's all to it
Where is the mass ait flow meter on a 20v turbo.
The maf or air flow meter on the 03 1.8t is located in the lid of the air filter box. passenger side front, take of the cover, unclip the lid and wrestle it out, 2 screws hold it in place.
THE SYMBOL FOR Flow Meter is : FI as Flow Indicator
The above is the symbol of flow meter.
One can recalibrate a flow meter by having a company or owning a flow meter supplier or using a flow meter lab. No matter what type of flow meter they need to be checked to see if they need to be recalibrated regularly.
There is a wiring harness plug to remove and a jubilee clip at each end.
rota meter
The OEM part number for a mass air flow sensor on a 2001 Volkswagen Passat is located on the part themselves. The number for this part is 0280218063.
I believe it depends on what kind of flow meter you are looking for. They can range from 19.99 and go up. The more expecive it gets the better the flow meter.
it principle denpend on what kind of flow meter. example, magnetic flow meter, it use magnetic force to measuring or coriolis flow meter which is use vibrated capilary tube as sensor. or more info you might watch on youtube.
1 Remove the upper casing of your mass air flow meter by prying the lock tab up and off the plastic housing or removing the bolts that hold the housing in place. Consult your vehicle's manual for the exact location of your meter and the type of housing it has to know if you will need to use a socket set to remove the housing.2 Lift the mass air flow meter up and out of its compartment. Be very careful not to touch the wiring that is on the meter, a slight touch can ruin the connection and you will have to replace the entire meter.3 Attach the red straw that came with your CRC Mass Air Flow Cleaner Spray to the spray nozzle by simply pushing it into the nozzle opening.4 Hold the can so the end of the spray straw is a minimum of 5 inches away from the mass air flow meter and spray the cleaner onto the meter. Rotate the meter in your hand as you spray and make sure you coat every portion of the mass air flow meter.5 Set the meter on a clean surface and let it air dry for 15 minutes. Re-install the clean mass air flow meter into your car............ nick ..uk...
The purpose of a flow meter is to measure the flow of either air or water. They allow one to measure the total volume of air or liquid flow and the rate of the flow.