0
The safest way to check a wall socket outlet is to use a plug-in "Household Socket Outlet Tester" that you can buy in most Do-It-Yourself stores.
Always read the instructions that come with it before you atttempt to use it.
Wiki User
∙ 15y ago
Wiki User
∙ 13y agoNo wires have to be removed and the safest way to check a wall socket outlet is to use a plug-in "Household Socket Outlet Tester" that you can buy in most Do-It-Yourself stores.
Always read the instructions that come with it before you atttempt to use it.
<><><>
As you needed to ask that question, the best further advice anyone should give to you is to call in a licensed electrician and get a professional opinion about the electrical problem you wish to solve.
Without first having had proper training about the safety precautions that must always be taken, no-way should anyone remove an electrical socket outlet from a wall or, indeed, from anything else.
Without understanding all the risks that are involved, by doing such a thing wrongly you could easily cause a serious injury to yourself and/or to other people who use that socket outlet.
Deaths by electrocution and house fires happen all over the world because of ignorance and carelessness.
<><><>
As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.
Before you do any work yourself,
on electrical circuits, equipment or appliances,
always use a test meter to ensure the circuit is, in fact, de-energized.
IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOB
SAFELY AND COMPETENTLY
REFER THIS WORK TO QUALIFIED PROFESSIONALS.
Add your answer:
Earn +20 pts
In North America how much voltage comes out of a normal wall socket?
In North America a nominal voltage of 110 to 120 volts comes out of a normal wall socket.
Is electricity produced in a wall socket?
no, the electricity is produced at a power station, some distance away from the house and the voltage is transported using wires/ cables to a house and then distributed around the house using "circuits" to a wall socket,etc. hence the electricity is produced elsewhere and simply presneted at the wall socket outlet.
Can you connect an on-line UPS rated 1kVA with only a 15A power cable plug into a wall socket of 5A if you are not likely to load the UPS more than 5A at any time?
I suppose, but I never heard of a wall socket with 5 amps. The amperage rating of anything is based on the lesser of either the wire size or the circuit breaker. Minimum wire size for residential wiring has been #14 or 15 amps for years and years. If in fact it is really a 5 amp wall socket, then your question is moot. If we could all be sure that we could all the time control what is plugged into a wall outlet, we wouldn't need electrical codes, but someday you are going to move and whatever wiring you have will still be there, waiting for the next guy to plug in a toaster oven. Consider yourself forewarned. Lawyers love stuff like this.
When you switch off a 3 pin power socket at the wall is it still earthed?
A properly installed switch for a wall socket will only interupt the 'hot' leg. The earth (or ground) and the neutral will remain connected.
Are there any dryers with a regular wall socket plug?
No; the third prong is there to protect you from stray voltage and it grounds the wiring. Although you could probably find an adaptor, it would be much safer for you to have an electrician rewire the outlets so they can accept a three prong plug.
How do you remove a wall socket?
# Find the circuit breaker or switch that controls the wall outlet and turn it OFF. # Remove the faceplate. # Remove the upper and lower screws holding the wall socket in place. # Remove the two wires from the back or sides of the socket. Installation is the reverse.
What is surface wiring?
Surface wiring is wiring that is enclosed in some kind of containment and surface fixed. For example if you installed a conduit containment system to supply a socket this is screwed to the walls with "saddles" and a mounting block is used to protrude the socket off the wall to take the conduit. This is surface wiring as opposed to concealed wiring which is encased in the fabric of the wall and all you see is the socket.
What size socket to use to remove a spark plug from a kawasaki vulcan 500?
18mm deep THIN wall socket has to be thin wall
What type of energy is a wall socket?
Electrical energy comes out of a wall socket.
What type of energy is wall socket?
Electrical energy comes out of a wall socket.
What type of energy is used for a wall socket?
A wall socket provides electrical energy.
Wiring a wall oven?
Yes, a wall oven needs wiring to operate.
What would cause a wall socket to catch on fire?
An outlet will only get hot enough to cause a fire if:There is a problem with the wiring connecting it to the supply, this will become quickly obvious when in use.It is overloaded. The electrical supply is supposed to have a fuse or breaker to prevent this.There is also a 3rd cause of potential fire:3. A loose wall socket connectionLoose wall socket connections can be a MAJOR concern, causing the plug and socket to overheat. This is primarily a problem on older homes.
If a contractor drills into the wiring in the wall should he have to put new wiring in it in order to pass inspection?
A contractor drilled into the wall by accident. Should the contractor replace the wiring in the wall in order to pass inspection.
What is OD of 30 mm socket?
Depends on if it is a standard or thin wall socket. Measure it.
How do you build a power supply that runs off the UK wall socket 240V and provides 12V 5V and 3.3V for an Arduino Project?
check out cheapphonecases.com/
Why oven cable heats up?
If you are referring to the cable from oven to plug, this can be a sign of an electrical problem . Get an electrician or appliance tech to check it and the wall socket it plugs into.
