to remove :
goto control panel . add/remove programs . in that list you can remove any unwanted software
to install a software run Setup ... and just prss any Next button
To install electric brakes, first remove the wheel. Then remove the dust cap, nut, and washer; this will be the place where you install the electric brakes.
remove clutch cover. remove old belt. install new belt.
Remove, removal
Remove the tire and wheel. Remove the axle end cap. Remove the bearing seal. Remove the bearing. Reverse the process to install the new bearings.
Remove tire, install spare which has an open center hole allowing access to axle nut, remove axle nut (33mm socket), remove spare, remove caliper, remove rotor, remove hub/bearing assembly, install new hub/bearing assembly, and so on in reverse order.
You will not have to remove your exhaust fan if you wish to install this unit as a matter of fact these two do not have any co-relation
Yes, if you would like to remove(un-install) a program you go onto the control panel and the go onto install, un-install a program then find the program you would like to un-install then click on it and un-install.
Remove the positive cable from your 1995 Nissan Pathfinder battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
remove old valve & install new tube simple
You need to remove the panels in the trunk to get at the top of the gas tank, then you can easily remove the pump and install the new one.
Remove serpentine belt. Remove pulley. Install new pulley. Install serpentine belt.
Remove the instrument panel cover. Remove the tachometer retaining screws. Remove the tachometer cable from the back of the tachometer. Reverse the process to install the new tachometer.