Want this question answered?
To replace the tailight out of a 1998 Cadillac Deville just remove the fuse and place a new one in the light\'s bulb.
Inside the trunk remove the fasteners that hold carpet on backside of lamp's. Then you can unscrew the caps that hold the light. Remove from car and replace the bad bulbs. Its really not hard at all.
Remove the connector from the back of your 2003 Cadillac parking light assembly. Take hold of the lightbulb, push in and turn at the same time to remove it. Reverse the process to install the new parking lightbulb.
you have to acess it from inside the trunk drive safe
Remove the black plastic right beside the fog light using a flathead screw driver or something of the sort. Using a 10mm wrench or socket, remove the screws. Twist light bulb out and replace.
remove grill by sticking screw driver down holes on the top , remove side light with star screw driver and remove the four 10 mm bolts (two at each side)
rear you use a torx driver to remove taillight assembly screws. them replace bulb.
ow to replace brack light switch 2006 cadillac cts
remove trim, remove clock, remove clock light harness, and remove and replace clock light bulbs
Work from behind light fixture Remove wire clip and twist bulb to remove Note: The above only works for the passenger's side headlight. The driver's side light is harder to get to. To replace the driver's side headlight remove the battery and it's hold down.
Take out the Tail light,should be a screw at the top. Remove screw pull from the top. Unscrew bulb from the tail light and replace bulb. This is a .5 on a scale of 10 for difficulty
1. Open deck led 2. Remove plastic covers (2) 3. Remove screws (2) 4. With a small screw driver pry on front of tail light to remove light from retaining pins 5. Remove bulbs