Inside the trunk remove the fasteners that hold carpet on backside of lamp's. Then you can unscrew the caps that hold the light. Remove from car and replace the bad bulbs. Its really not hard at all.
Take out the Tail light,should be a screw at the top. Remove screw pull from the top. Unscrew bulb from the tail light and replace bulb. This is a .5 on a scale of 10 for difficulty
lift the tail gate and there are two phillip head screws on the metal by the tail light.
try from inside the trunk
Yes, they are direct bolt in
you don't replace the tail light you just replace the bulb in it
In the trunk directly behind the tail light pull the carpet back and there are three twist off plastic nuts take them off then pull tail light straight out
Some lights can be accessed from the trunk and some you have to take the light assy off.
On a 2012 toyota Highlander, How do you replace tail light Assembly
On most American cars, the dash fuse feeds off the tail light fuse. The tail light fuse is typically 20 amps and the dash fuse feeds off from it and is usually 5 amps. If the tail light fuse blows, you loose the dash lights.
Remove tail light housing. Remove lamp. Replace lamp. Replace tail light housing.
you can take the tail light out by unscrewing the wing nuts in the trunk, when all wing nuts are off pull the tail light out then take the light bulbs out to replace the tail light.
You can not, you will have to replace the entire tail light.