Some lights can be accessed from the trunk and some you have to take the light assy off.
how do I replace a parking lamp (left) on a 1996 Ford Taurus
If "safety lamp" is actually referring to the high-mount / center brake light, see "Related Questions" below for more
Remove tail light housing. Remove lamp. Replace lamp. Replace tail light housing.
Inside the trunk remove the fasteners that hold carpet on backside of lamp's. Then you can unscrew the caps that hold the light. Remove from car and replace the bad bulbs. Its really not hard at all.
If the "side lamp" is located in the headlamp lens assembly, check out the "Related Questions" below for lots of detailed help
On my '99 Ford Taurus Wagon: Pop the back door's inner trim off the clips. Don't need to remove the trim completely. Unscrew the bolts. Push the lamp module out.
To replace a three-way light socket in your lamp, first unplug the lamp and remove the shade and light bulb. Unscrew the socket from the lamp base and disconnect the wires. Connect the new socket's wires to the lamp wires, following the manufacturer's instructions. Screw the new socket into the lamp base and reassemble the lamp. Test the new socket with a light bulb to ensure it is working properly.
1996 Ford Taurus turn signal light bulb lamp replacement: Purchase the correct replacement turn signal light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the turn signal light bulb lamp replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
carefully
The 1989 Taurus has larger headlights separate from the turn signal(corner lamp) The 1993 Taurus has more slender headlights joined to the corner lamp.
To replace a 3-way light socket in your lamp, first unplug the lamp and remove the shade and light bulb. Unscrew the socket from the lamp base and disconnect the wires. Take note of the wire connections or take a picture for reference. Purchase a new 3-way light socket and connect the wires in the same way as the old socket. Screw the new socket into the lamp base and reassemble the lamp. Test the new socket with a light bulb to ensure it is working properly.
It is a Pontiac Aztek. Light a match and get some marshmallows.