Very easy, just pull it straight up,one person on each side helps.The bottom seat has two tabs,one under each persons seat, that you pull towards the front to release the seat.
Push back on the bottom of the bench seat (takes a lot of pressure) to release holding clips Lift bench out Back of seat is secured by clips or bolts that are now accessible - remove these and lift upward on back of seat to release upper clips Remove seat back
Remove the four bolts on the bottom of the seat back and the 2 bolts on each headrest. Take out the headrests. Lift straight up.
Look under the front of the back seat, you will see 2 large bolts. Remove those and the seat bottom will pull straight out. Now you will see 2 bolts under the seat back, remove those, then lift up the seat back and it should come free. That's it.
* Remove the seat cushion by pulling out on the retainer then pull up sharply on the cushion.After removing the cushion remove the bolts and lift the seat back out
Remove the two Allen bolts at the rear end of the seat with a hex wrench, then slide it back.
1993 kawasaki voyager motorcycle how do you remove the driver seat?
Push on the lower end of the seat to unclip holders (takes a lot of pressure) After unclipped slide forward to remove bench You will then see clips or bolts holding the back of the seat remove/release these and slide back up to release upper clips
at the bottom of the back of that seat their should be latches you push down to release!
To remove a 1993 Nissan maxima rear speakers you will have to remove the seat back, you will need a wrench to remove both of the bolts on each side. The seat will move once done, and then pop the parcel shelf trim. The speakers should come out.
there are two bolts in the back of the seat. remove them and then slide the seat back about an inch and remove
Yes two back seats, plus a center back console
Push the lower seat inward towards the trunk and lift up. this will allow you to remove the lower seat. Once this is done you can gain access to the lower bolts for the back of the seat. remove these bolts and then lift the back of the seat up and out.