to take out the rear speakers in a 1995 Chevy Beretta you need to remove the plastic molding on the inside of the passenger compartment in the backseat area of the car, and pull the backseat forward to get to that rear deck by the window. you will also need to remove the rear brake light in the window. when installing new speakers it is a good idea to cut the fabric so that you can get to the speakers much more easily if you need to remove them again.
Remove the back seat with a number 55T torque screw socket and then you can slide out the back panel to get to the speakers.
You need to do a lot if it is like my 1995. You need to remove the back seat remove the back of the back seat remove the screws holding the rear deck.. where the speakers are. then remove the screwss... what a pain.
front or back speakers? the back speakers, you must remove the rear seat. it is simply held by two bolts on the bottom edge of the seat. once you get them out, there is two torx bolts you must remove. then you will just pick up on the back rest and it will easily come out.
Reverse the process to install the new speakers. You will need to remove the speaker covers from your 1995 Chevrolet rear speakers. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers.
Remove the back seat cushion by pushing it horizontally back and then lifting up vigorously. Remove the two large nuts holding down the seat back; lift up and off on the seat back. Remove the rear deck cover by sliding forward. Unscrew the speakers.
To replace the back speakers in a 2006 Acura TL, remove the SRS housing on both sides and the back panel of the speakers. Remove all wiring attached to the speakers and replace.
my celica had 8" subwoofers in the front and standard 6" speakers in the back. I had a 1995
Remove the covers from your 1988 Mercedes-Benz 300 speakers. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers.
You will need to remove the covers from your 1996 Integra rear speakers. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers.
Remove the dash pad, then remove the speakers from the dash frame. For the rear speakers, open the trunk and remove the brackets, that hold the speakers in place. not for the back speakers ..you have to remove the lower rear seat then remove the seat belts then the rear seat back then remove the header panels in the back seat then remove the deck cover ..the rear speakers are bolted in from the top down under the rear deck cover....and the front speakers i believe are mounted in the door panels in the front doors ..you have to remove the door panels to remove them .some do have them in the dash also if they are there u do as the person stated before me.
1995 Taurus - Sable front speakers are 6.5 and back are 6 x 9
its right on the back side of the manifold at least it is on my 1991 gt beretta it like bolts right into the back of the intake manifold. Scott Welker