The ignition barrel can be removed by removing the retaining ring. The barrel will slide out. Remove the wiring harness from the back of the barrel.
Pay your bills and it will never have a barrel put on it!
with a barrel lock key
how to remove key barrel from a XR8 steering column
You can remove the ong barrel from the Gamo P-25 Tactical although that will not make the barrel shorter.
Yes, you can remove the barrel of a model 66 Shotgun!
First pull back the slide until it locks in a open position then remove the end off of the forearm and then remove the forarm then proceed to remove the barrel.
to remove stilo ignition barrel, look underneath the barrel. there is a square button holding the barrel in. put the key in the ignition, turn 2 notches, and press the button in with a screwdriver. Then wiggle the barrel out using the key.
you first begin by standing the gun on it's butt compress the barrel downward and loosen then remove the nut on the magizine and remove the forarm you then remove the barrel by getting a firm grip on the barrel and pull it off you can then remove the frictoin rings and spring
Take out the clip , unload any existing bullets from barrel. Remove the two screws from the clip plate, and then remove the two main screws,one in front of and one behind the clip area. Now carefully remove the barrel from the stock. Then remove the bolt action and clean the barrel as per the cleaning material instructions.
with a hacksaw
Leave this to a gunsmith