answersLogoWhite

0

How do you remove black corrosion from a plastic faucet?

Updated: 8/17/2019
User Avatar

Wiki User

15y ago

Best Answer

Ariel Non-Bio, Hot Water And A Good, Hardwearing Cloth. Ariel Non-Bio, Hot Water And A Good, Hardwearing Cloth.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you remove black corrosion from a plastic faucet?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How can you clear out corrosion clogging your faucets without tearing your pipes apart?

The clog may be at the faucet itself. If the faucet has a screen, try removing that first. If no screen, or nothing is found in the screen, the clog may be something lodged in the faucet's valve or the flexible tubing connecting the faucet to the pipe. If clearing these doesn't solve the problem, your best bet is to replace the pipes going to that faucet. Best of luck. I had old black iron pipes in my house with so much corrosion that there wasn't a large enough hole for a pencil in what was originally 3/4in pipe. I ended up replacing all the plumbing in my house.


Shower Faucet ?

form_title= Shower Faucet form_header= Install the shower faucet you want in your bathroom! Do you have a working faucet in your bathroom?*= () Yes () No () Not Sure What type of faucet do you want installed?*= _ [50] Do you want the shower faucet to include a massager?*= () Yes () No () Not Sure


What is the oil filter for 2008 dodge sprinter diesel?

Driver side front of the engine, you have to unscrew a large black plastic part to remove the filter elementDriver side front of the engine, you have to unscrew a large black plastic part to remove the filter element


How do you change the oil filter on a 2008 dodge sprinter?

Driver side front of the engine, you have to unscrew a large black plastic part to remove the filter elementDriver side front of the engine, you have to unscrew a large black plastic part to remove the filter element


How do you change the oil filter for 2006 3500 dodge sprinter?

Driver side front of the engine, you have to unscrew a large black plastic part to remove the filter elementDriver side front of the engine, you have to unscrew a large black plastic part to remove the filter element


How do you replace front door lock actuator on a 2002 Toyota rav4?

Remove the door panel, remove the lower side of the window channel, remove door lock mechanism. remove the black plastic cover help by 2 screws, then remove the black plastic door lock unit, with the connector on it, and replace. You can pry the unit open and replace the electric motor in it.


How do you remove phosphoric acid stains on black plastic?

To remove phosphoric acid stains on black plastic, make up a paste of white vinegar and baking soda. Apply the paste to the stain and allow to sit for a few minutes, then rinse with warm water.


How do you adjust the headlights on 2002 Ford Crown Victoria?

Remove that wide black plastic piece above the headlights. Then using a 4 mm socket you have to turn the screws with black plastic around them.


Where are the spark plugs at in a 1990 Lexus 400 LS?

You have to remove the black plastic cover that is in the center of the valve cover. 4 bolts the two you see and if you look at the black box part at the front of the valve cover you will see the other two bolts. Take all 4 bolts out, remove the black plastic cover and you will see the spark plug wires. Good You have to remove the black plastic cover that is in the center of the valve cover. 4 bolts the two you see and if you look at the black box part at the front of the valve cover you will see the other two bolts. Take all 4 bolts out, remove the black plastic cover and you will see the spark plug wires. Good


How do you change the tail lights in a 1983 Chevy Camaro?

remove interior panel and unscrew large black plastic nuts, remove light assembly


What does the intake manifold on a 1995 Oldsmobile Aurora look like?

Remove the plastic nuts on the gray cowl on the top of the engine. Notice the black plastic plentum, that's it.


How do you replace a taillight bulb on a 1999 VW Beetle?

you need to remove the tail light lens. There is a large round plastic cap located behind the lens in the truck .Remove the cap and there is a black plastic nut that you can remove by hand, that will release the lens and you will be able to replace the bulbs.