Push the lever next to it as u pull the trigger then slide it out
Remove the firing pin from the rear and the locking bolt will side out the side of the bolt
remove shifter boot/ 4 screws to floor board remove nut from cross bolt install nut on opposite side of cross bolt and tighten nut cross bolt is tapered, this will remove cross bolt
Try holding the trigger back when you remove the bolt
Open the bolt, pull it to the rear, hold the trigger back and remove the bolt. sales@countrygunsmith.net
First remove the screw opposite the bolt. Operate the bolt as if you were cocking the gun, pull the trigger and it will slide out.
My 2004 alternator on the V6 has three fasteners that have to be removed to remove the alternator. The pivot bolt,the stay bolt and the adjustment bolt. Once you loosen the pivot bolt and the stay bolt, the adjustment bolt can be turned back to loosen the belt enough to remove the other bolts for alternator removal.
Open the bolt, hold the trigger back, pull the bolt out
generally to remove a broken bolt, you will need a drill and an easy out
Remove the stock and you will see what is keeping the bolt from sliding out.
Use a bolt extractor to remove the broken battery bolt..This is the easiest way...
Once you have loosened the alternator belt, creep under the car and remove the nut that holds the pivot bolt to the engine block, you actually do not have to remove the bolt entirely to be able to remove the alternator. Loosening the pivot will be enough.
Just pull the trigger as you pull bolt out.