Want this question answered?
with a hammer and chisel
Yes, but the walls of the hole may contaminate the cement. Mixing the cement may be very hard, and precarious. Further, you may not be able to remove all the cement from the hold afterwards. It is more advisable to use a cement-mixer.
Normally you have to cut them off with a grinder. A grinder with a metal cutting blade will allow you to take them down flush with the concrete. Wear eye protection though it does throw lots of sparks and some concrete.
M 40 MIXING RATION SAND AND BLUE METAL CEMENT
It is not hard task. If you want to break the cement then you should need some strong thing like a good metal detector. Hammer is also another good weapon to break cement easily. Try anyone for this purpose.
Yes, their should be two screws.
remove it buy washing with oil
with a chisel?
cut it out of the clothing
you put a can of beans in it
cement, metal and hold metal together
wet a rag pour a can of coke on it and then rub it on the cement. then get a stiff wire brush and then rrub it against the cement
no it has a metal and cement base
If the cement is not too old, try water and a soft scrub brush.
Remove and replace it.
with a hammer and chisel
for 100sft or 100cft