To remove center air vent s a t20 tool is needed. Unscrew, climate control unit and compartment. After it is pulled away, their vents are exposed. To remove air vents unscrew bolts and pop out of place.
This is a common question for new owners of Mercedes 190e. The center vents only blow outside air and conditioned air from your a/c. This is the design of the system. The reason Mercedes made it this way is to keep the driver alert and awake. You can adjust the flow of air from the center vents by moving the slider up or down, but the air will always be the ambient temperature from the outside or from your a/c when it is engaged.
the radio is below the center of the windshield, right below the air vents... If you mean how do you REMOVE the radio then that's another question altogether. PULL out center air vents, REMOVE ashtray, there are 2 bolts there and 2 where you removed the air vent. Remove those and your there.
How to remove the dash board in a 2003 Chevy Cavalier. Center A/C vents not working and it squeaks all the time.
There are two possibilities. Its either on the overhead console by the rear view mirror or on the center dash control switches below the heater vents.
a person satnding in the way of the vents
remove the drawer in the center console near the back seats and then remove the cover that has the two small air vents by pulling it towards the rear seats. Will be visible the stud bolt.
If it is the 1-cd AM/FM player, hit your dashboard, right above the center vents. Hopefully you didn't really jam it in there.
The flap that directs sir to the selected vents is jammed or broken...or the switch that controls it is.
take them out :)
that is the default mode for the hvac, check vacuum line on passenger side of motor, comes for the strut area over to motor, main vacuum hose for system, mine had come loose
If you are attempting to remove the center air vents in the dash panel you will need to: 1. Remove the driver side Cigarette Lighter and the Passenger side Auxiliary plug-in. To do this locate the slot at the bottom on the each of these that will allow you to pop it loose with a screw driver. 2. After removing the panels un plug them and set them aside. You will then see 2 screws, remove these. 3. Carefully pry the panel loose. It will pop off but use gentle force so you do not break the panel. The air vents come off with the panel. From there you can remove them or clean them...
remove Allen screws in the vents pull the covers and remove the deck