Step 1: Use a small flathead screwdriver to pry the small plastic flap in the door handle area. Behind it is a screw that will need to be removed with a Philips screwdriver. You do not need to remove the plastic piece, just the screw.
Step 2: Use a flathead or your fingernails to pry open the front portion of the long door handle. It should come off easily.
Step 3: There are two screws behind that panel on either end of the door handle. Once those are removed, slowly pry along the edge of the panel and pull away from the door. The rest of the panel is held on with plastic plugs that should come right out.
Step 4: Unplug the wires behind the door panel from the panel itself. There are two sets of wires on the driver side and one on the passenger side.
Step 5: You should now be able to remove the door panel completely. Installation is the reverse of this.
How do you remove the light housing for a 2006 scion xb
Scion tC was created in 2004.
according to scion, tc stands for "touring coupe"
scion tc
one year
The 2010 Scion tC has 16 valves.
The 2012 Scion tC has 16 valves.
The 2006 Scion tC has 16 valves.
The 2011 Scion tC has 16 valves.
The 2014 Scion tC has 16 valves.
The 2005 Scion tC has 16 valves.
The 2009 Scion tC has 16 valves.