Want this question answered?
Use this video as a guide to remove the door panel from the Bronco.
Youtube has this answer in video
You will need to remove the screws that hold the door panel on, and then remove the door panel pins that hold the door panel to the door of the car. I'll also include an auto repair video in related links that will walk you through this whole procedure. Hope this helps you out.
Here's a great how to video that will show you how to properly remove the door panel on your 2005 Chevy Malibu. A link has been included below.
first you go to the control panel and them u click add or remove programs and then find it and remove it. :)
You would need to remove all of the trim pieces from it, and then pry it off of the door with a door panel removal tool. An instructional video has also been included below, to help walk you through the correct steps on removing the door panel.
Watch this YouTube video http://www.youtube.com/watch?v=Te-Oetp-Omw
Take off inside door panel. Here is a video link that shows how. Even with the back door closed you can remove the door panel. You do not have to remove the back seat. You just really need to pull hard on the door panel. After you remove the door panel, use a small screwdriver to push up on the child lock switch. Then you should be able to pull on the rod and open the door. You should replace the outside door handle while you have the door panel off. Watch the video. www.youtube.com/watch?v=bUV6BZfVxDY
Inside the trunk there is a trim panel that needs to be removed that covers up the taillight bolts. Remove the trim panel and then you can remove the two bolts that hold in the taillight. I have also included an instructional video that will show you how this is done. Hope this helps, 1ATony
Control panel > System > Hardware > Device manager > Sound, video and game controllers > right click on your audio device > Uninstall
To remove the door panel on your 01-06 Dodge Stratus you would first need to remove the door panel. Then there are two bolts that hold the mirror to the door. You will need an 8MM socket or wrench to remove these from the mirror. I have included an instructional video below that walks you through this entire process. Hope this helps. 1aauto.com
Disconnect the batteryRemove the cover from the door pullRemove the Torx bolts that hold the door pull to the doorTake your door panel removal tool and remove the door panelI've also included a link to a How To video (in the related links section below), that will show you exactly how to do this.