Want this question answered?
what is the cost of repair of Toyota 4runner exhaust manifold
Remove the intake manifold, exhaust manifold, and then remove the head. Scrap off the old gasket and install a new one. Reinstall the head and Torque the head bolts in the proper sequence. Reinstall the intake and exhaust manifold torque the bolts to the proper torque. This is a major repair and not for a novice to try.
The 1995 Honda Odyssey exhaust manifold bolt torque specification is 45 pounds. The exhaust manifold bolts should be torqued in 15 pound intervals.
there are 2. 1 on each exhaust header.they may be easier to see from uderneath. They are both downstream of the exhaut manifold. The driver's side is attached to the exhaust manifold. Passenger's side is attached to the Y pipe almost immediately downstream of the flange that connects the Y pipe to the Manifold.
The exhaust manifolds are located on both sides of your V6 engine
It is in the exhaust manifold on the rear of the engine.
Exhaust manifold or on catalytic conerter.
Behind the exhaust manifold, next to the alternator.
Look between exhaust pipe & block.
There is on bolted to the left and right side of the engine.
Rear of engine, screwed into exhaust manifold.
in the exhaust manifold (it screws in) or if not there it could possibly be screwed into the converter