Want this question answered?
The only way to change the plugs is to remove the top cover first. Then remove the cover for each plug.
Disconnect the battery, remove the engine cover, remove the spark plugs wires and boots, and remove the spark plugs. Put in the new spark plugs, replace the spark plug wires and boots, replace the engine cover, and connect the battery.
Remove the passengers side front seat. remove the metal engine cover after pulling carpet back, remove the long metal cover covering the spark plugs and wires.
were is engine cover wot does it do
remove the center cover on the engine,two cross head screws this will give you access to the leads and plugs
You need to remove the valve cover ((V8) motor) and remove the spark plug coils, then you can change the plugs.
unscrew the two hex screws on the top of the engine block to remove the plastic cover hiding the spark plugs & boots then take it from there.
remove three bolts on the top of the rocker cover dust cover then remove plugs in the usual manner
remove engine cover
well first of all you have to remove the black cover on your engine..... it will have writing on it ex: ectech 2.2. you will need to remober the throttle wire off the clip and remove the clip... after that there will be 4 10mm bolts on the cover... remove them... you will need to pull the cover off.After that u will c the plug wires and the plugs... the plugs r 5/8..
Disconnect the battery, remove the engine cover, remove the spark plug cables and boot covers, and remove the old spark plugs. Put in the new spark plugs, attach the boot covers, and cables, replace the engine cover, and connect the battery.
first remove the engine cover. then remove the air intake collector, and the upper intake manifold and then the ignition coils. take out spark plugs and replace. this is better left to a pro.