Pop the small covers off the screws and remove the screws. Then pry the door panel loose. It's held on with plastic snaps that pop out when you pry with a screw driver or pry tool. Be careful not to scratch anything.
Go to this website. It will show how to remove the door panel.
Using a screwdriver, remove the screws from the panel, remove the clips from the panel, and pull the panel away gently. Remove any wiring connectors, and remove the panel from the frame.
Magic
Using a screwdriver, remove the screws and clips from the panel. Pull the panel away slowly, remove wiring connections and the panel will come free.Ê
Yes.
just remove it
Using a screw driver, remove the screws and remove the clips from the door panel. Remove the panel slowly, remove any wire connections, and pull the panel off the door frame.
The 2000 Chevrolet Blazer passenger side kick panel is held in place by eight retaining bolts. Remove the retaining bolts and the kick panel will come free.
Remove the screw under the door latch
remove the dash board panel around it and take it out
Remove the rear door panel.
Using a screwdriver, remove the screws that are in the door panel, be sure to remove the clips as well, and gently pull the panel away from the frame. Remove any wire connectors between the frame and the panel, and pull the panel off the rest of the way.