Remove bezel surrounding the radio. It is held in with clips that will release if pulled forward. I used a plastic flat bladed putty knife. Once bezel is removed it will reviel 2 screws on far right and far left, remove these.
Now we are going to remove the glove box/ash tray panel to expose a bracket that is holding the radio in place. Top of panel open ash tray door and observe above it 2 phillips head screws. Remove these. Now to the bottom where you will find 2 more phillips head screws (below the glove box door). Remove these as well.
Look into area below radio and on the right side of radio there will be a bracket attached to the radio extending to well behind the radio. Remove the bolt from the far back wall and now the radio can be removed by pulling it forward.
you pull it out
go to BEST BUT and spend 69.99
you will see 2 holes in each side of the radio, insert standard radio pins into these and the radio will pull out
If you have the factory radio and there is a hole in each corner of the radio. You will have to buy a stero removel kit from the store. Walmart has them for around $6.00.
junk it
Need to see diagram so i can remove or fix tail light on Chevrolet cavalier 1995
To remove the radio in a 1995 Toyota Corolla, first pry the radio frame from the dashboard using a flat tool like a screwdriver. Then, press in on the pins at each side of the radio and slide it out of the dashboard. Remove the wires from the back of the radio.
In 1995 there were not any carburators as everything is fuel injection.
The 1995 Chevrolet Lumina dashboard is held in place with for retaining bolts and 12 retaining clips. Remove the retaining bolts and pry outward on the retaining clips.
how do I remove the dashboard from a Mercedes c 280 1995?
you can't
removal of 95 chevy corsica