Want this question answered?
You will need a 35 mm socket.
35mm
Identical bearing replacement procedure to a 307
use a slide hammer to remove the hub from the bearing. do this on the car. or remove complete knuckle and press hub out with a press
The hub is pressed in. Remove the knuckle with the hub and bearing in it and take it to local machine shop.
There are two tools needed to remove a front hub from a 2003 Frontier. These include a screwdriver and a cone wrench.Ê
The front hub takes a 35mm deep socket. (It is not necessary to remove the hub to change the rotor.)
# Raise and safely support the vehicle securely on jackstands. # Remove the brake caliper assembly. # Remove the front disc brake caliper anchor plate. # Remove the hub grease cap. # Remove the cotter pin. # Remove the spindle nut. # Remove the front wheel outer bearing retainer washer. # Remove the outer front wheel bearing. # Remove the hub grease cap gasket. # Remove the front disc brake hub and rotor. # Remove the wheel hub grease seal. # Remove the inner front wheel bearing.
you cant
i front or rear.
Buy a new hub
YES!!!