I drilled out the bolts that held it in place because they were thoroughly rusted in place. Once that was done the rotors came off easily.
i have 2006 endeavor changing brakes do i have to remove the two screws in the rotor to remove so i can have resurfaced
They have to be pressed out mechanically. Mitsubishi blew it on this design.
I assume that you have removed the wheel and so on. In order to remove the rotor you will have to remove the caliper and its bracket. Only after you will be able to remove the rotor.
Jack up the front of your 1991 Mitsubishi Eclipse. Remove the brake pad assembly. Loosen the brake rotor by tapping on it with a hammer or mallet. Slide the brake rotor off. Reverse the process to install the new brake rotor.
there are two screws that hold the rotor to the hub. be careful not to damage the screws.
How do you remove a front rotor on a 1993 F 150 4X4
how to change rotor front disc on 2006 sprinter
Remove the wheel, remove the caliper, and the rotor will just come off.
Remove the front wheel then remove the 2 caliper bracket bolts behind the rotor and the rotor should slide off.
The front brake rotor, on a 2004 Chevrolet Colorado, can be removed by first removing the wheel. Next, remove the brakes. The rotor will slide off
pull the wheel off, remove the two caliper bolts, remove the caliper and the rotor can be removed
Remove wheel Remove caliper mounting bolts Slide caliper off rotor Rotor will slide off hub assembly