you have to remove the caliper to access the brake pads
To remove the front rotors on a 1996 GM 3500 4x4, start by safely lifting the vehicle and securing it on jack stands. Remove the front wheel, then take off the caliper by unbolting it from the bracket and hanging it securely to avoid stress on the brake line. Next, remove the caliper bracket, and then you can slide the rotor off the hub; if it's stuck, gently tap it with a rubber mallet. Finally, replace the rotor with a new one and reassemble the components in reverse order.
== ==
To change the front rotors on a Chevy 3500 van, first ensure the vehicle is securely lifted and supported on jack stands. Remove the wheel, then take off the caliper by unbolting it and hanging it safely (do not let it dangle by the brake line). Remove the caliper bracket to access the rotor, then slide the old rotor off the hub. Install the new rotor, reattach the caliper and bracket, and finish by putting the wheel back on and lowering the van.
They are sealed units and are not greaseable.
A 1994 Ram 1500 has a Dana44 front axle. A 2500/3500 has a Dana60 front axle.
Yes, remove wheel hub on both.Yes, remove wheel hub on both.
Yes
Yes
Under the round black cap on the front driver side.
If it has a solid front axle it does have a trac bar.
Front driver side of the engine.