Unbolt the top, or cut the bolt off, and just un bolt the bottom. Then replace with the new one.
How do I remove the front shock bottle pin of my Isuzu rodeo 2000
how to replace front shock absorber on Mitsubishi 1997 TE Sedan
at the dealer
There are ( shock absorbers ) on a 1997 Ford Aerostar ( front and rear )
Unscrew it.
remove stud locks
The owner's manual shows - "to raise a front wheel , place the jack directly under the shock absorber so that it contacts the bottom of the shock "
remove upper bolt shock remove swing arm nut, remove rear brake master cylinder, remove chain
To replace the front shocks on a 1997 Saab 900 S, first, safely lift and support the vehicle. Remove the front wheel, then detach the brake caliper and support it to avoid stressing the brake line. Next, unbolt the top shock mount under the hood and the lower shock bolt on the control arm. Replace the old shock with the new one, reattach all components in reverse order, and ensure everything is properly torqued before lowering the vehicle.
The 1997 Land Rover Discovery shock and Sobers are held in place with a retaining bolt on each end of the shock. Remove the retaining bolts and the shock will come off. Reverse the process to install the new shock absorbers.
The rear shock spring will need to be compressed with a spring compressor. When the spring is compressed the top nut can easily be removed.
Remove Front Grille. Remove Electrical Connectors. Remove Bolts (3 ea). Pull out Headlight Assembly.