The wires run through the tank to a plug, Dixon ect the plug and remove the pins from it (keeping track of which pin goes where). Most have three pins and an empty slot, if you've got a low fuel warning light in the fairing then you probably have four pins to remove. After removing the pins you simply lift up on the guage it is pressed in with a rubber sleeve. If you must pry on it be smart, use something that won't damage your paint or your chrome.
My 2004 Rebel does NOT have a fuel gauge. Would be handy though.
Remove the instrument panel cover from your 2002 Subaru. Remove the fuel gauge retaining screws. Remove the wiring harness from the back of the fuel gauge. Reverse the process to install your new fuel gauge.
fuel gauge on my 99 buick centry custom stays at full , then drops to empty. Is there a fuse or relay that i can have my neighbor look at it
fuel gauge not working and power windows and radio.2004 mercury mountaineer.
Take the gauge face plate off, pull the gauge out.
The fuel gauge is integrated into the gauge cluster. To replace the gauge you need to replace the entire assembly. You will need to remove it-which is very easy, and give the dealer the number from the back. It will take a couple of days to get a new one. I'm in the process of doing one right now.
Most fuel gauge problems are caused by a faulty fuel gauge sending unit. The fuel gauge sending unit is located inside the fuel tank. In most cases the fuel tank must be removed to replace the sending unit.
More often than not, a fuel gauge problem is usually a faulty fuel gauge sending unit in the fuel tank.
you have to remove rear seat ,under the seat there's two covers , one is for the fuel pump , the other is for the fuel gauge sending unit .Remove cover on passenger side and remove fuel gauge sending unit .
Remove the fuel tank then the gauge and pump.
necessary to remove the fuel tank. Pump is attached to fuel gauge sending unit located in tank
The fuel gauge sending unit is located inside the fuel tank.