First, the 1200 last year was 1987, after that it's the 1500. Just follow the fuel line if it's a 1200.
No, the engine mounts are totally different. The six cylinder 1500 engine will definitely not fit into the 1200 frame calculated for a four cylinder engine. Experts don't think this has ever been attepmted.
First, is this a 1987 1200, last year for 1200's, or is this a 1500, 1988 ? 1987, 1200, fork oil, If you just change the oil without doing a full teardown then 323 cc ( 10.9 oz ) If the fork's have been taken apart for new seals then, 345 cc ( 11.7 oz ) Ask your local dealer for the right oil.
6.
No reverse was not available till 1988 GL1500
take old one out, install new one.. :-)
The oil drain plug is located on the underside of the engine directly below the filler hole. The head of the bolt will need a 17mm socket to remove.
The carburetors used on the Honda GL 1500 1988 are produced by the Keihin Corporation, with headquarters in Shinjuku-ku, Tokyo.
Not sure about a 1200, but on a 1988 sportster 883 its behind the sealed beam headlamp bulb.
Remove the Oil Filter and remove the Alt. through there. It will take some twisting and turning to get it out and In but it'll work
In the inlet fuel line in the carb. Remove fuel line and then the larger fitting behind, filter should be right there
Yes inside the fluid pan you find the filter yes it is inside the tranny you have to remove the oil pan drive safe
on the 1988 Vovlo 240, the fuel filter is loca