Kaboom! Kaboom!
Reverse osmosis water filter do indeed remove hard water minerals - up to 95% of calcium and magnesium ions. These are the ones that cause hard water problems.
Brita filters claim to remove chemicals such as chlorine as well as mercury, cadmium, lead and other impurities. The fact of the matter is due to the fine granite filters that attract the metals it removes mostly any impurities you have in your water.
you change it and replace it.......
Granite is able to withstand the use of acetone. If you have a water based stain on your granite you can dampen the spot and apply acetone. Let it dry and then rinse and wipe off the granite.
Sometimes the calcium (from hard water) has soaked into the granite, so the stain is not on the surface. Try a razor blade first, then look for the hard water cleaning procucts, but test them on a granite scrap from that countertop first!
Yes, prolonged exposure to water motion will etch away a rock as hard as granite.
It depends on why the Granite needs to be removed, but because Granite is so hard it is usually blasted away with dynamite to break it up into small pieces to be carried away.
Granite is a very hard rock.
granite is very interesting and is hard
No, hard water is in the water, it is not caused by the type of pipe.
No. Granite is quite hard.
This is likely an etch or a hard water stain. Etching is caused when liquids are slightly acidic or basic, and you can usually feel a slight roughness. Absolute Black has a lot of problems with this. Sometimes hard water soaks into the stone, then evaporates, leaving whatever mineral content behind as a ring. Only an expert will be able to remove this. Did your granite fabricator not warn you of this? I would contact them and have them repair the problem.
Granite is one kind of hard rock.
Those are hard water stains. You need to wipe your sink dry after use, if you have hard water.
I found that Lemon juice removes the rust stains. Apply over the stain, let it work for five mins, use a hard brush to scrub and rinse with water. Reapeat this process up to five times to lighten, if not remove the stain.
If you don't have hard water the water stain will eventually dissapear. For more info go to solidsurfacealliance.org or forum.solidsurfacealliance.org