Want this question answered?
To replace the headlight assembly on a 2006 Jetta, remove the front grill. Then remove the headlight assembly by taking off the screws that secure it in place. Replace with new.Ê
You have to unbolt the entire soft bumper and remove. The dealer did this on my car to replace the headlight assembly.
remove the whole front end
# Remove the front bumper cover # Remove the upper headlight housing mounting bolt and pushpin # Remove the lower headlight housing mounting bolts # Pull out the headlight housing assembly and disconnect the electrical connector
You have to pull the headlight assembly off. But it's very easy to do so. just remove the hexagonal screw and pull the white tab up and BAM!! pulls right out.
3 10mm bolts hold on the headlight assembly. Remove bolts and lift assembly slightly from the bottom to release it. Pull assembly forward. Twist marker light holder to remove it. Bulb pulls out. Reverse for installation.
How do you remove the light housing for a 2006 scion xb
Remove the grill. It is held on by push pins so must be done carefully. The headlight is held in by two slide daggers. One is near the midline on the top portion of the headlight assembly. The other is down the side on the outside edge of the assembly. A stubby flat blade screwdriver works well to pop them out. They will not fall out as they have keepers to hold them when they are out all the way. All the answers are at www.trailvoy.com
The horn is located behind the left headlight. Remove the headlight pins, and then the headlight. You should be able to spot it then.
Lower tailgate and remove two screws. Pull assembly to the rear and it will release.
Call 3 Chevy owners and promise them they can ride in the back seat. If you mean a headlight, they screw in from the rear of the assembly. The tail lights are similar, but you have to remove the entire light to access them.
All you will need to change the bulb is a screwdriver and a new bulb. Remove the headlight cover using the screwdriver and remove the burnt out bulb. Once out, you can insert a new bulb into the slot and replace the headlight cover.