push tab in to remove
Behind the glovebox hope this helps
Remove the water supply hose from the top of your 2003 Chevy Monte Carlo thermostat housing. Remove the thermostat housing retaining bolts. Lift the old thermostat out. Drop the new thermostat in and reverse the process.
It is under the housing that the upper radiator hose hooks to.
Just did this last week, follow the BOTTOM hose!
Drain the radiator. Remove the top radiator hose on the 2003 Buick Century. Unbolt the hose inlet. Remove the inlet housing and take out the thermostat. Replace the thermostat, install the housing and top hose, and refill with antifreeze.
this website shows how to remove it 2003 model http://www.fitaudio.com/?View=entry&EntryID=69
Drain the radiator. Remove the upper radiator hose at the engine. Remove the bolts holding the thermostat housing. Remove the housing and the thermostat. Clean both surfaces and install the thermostat and gasket. Install the housing,bolts,the hose and refill the radiator.
Drain the radiator into a container. Remove the upper radiator hose at the engine. Remove the2 bolts on the thermostat housing and lift it up. Remove the thermostat and clean the surfaces. Install the thermostat and the bolts. install the top radiator hoes and fill the radiator.jd
120,000 miles or 10 years on a 2003 Model 1.4 TDCi
To change the thermostat on a 2003 Dodge Neon SXT, first remove the drain plug to let the engine coolant drain into the pan. Unhook the coolant reservoir and remove the hose clamp. Spray the two thermostat housing mounting bolts with a solvent and pull out the old thermostat.
You can do it if you remove the heat shield it works.
No, but it does make it easier.