Pull the steering wheel
Remove the steering wheel lock by compressing it and removing the small metal ring that holds it in place.
Remove the screw that holds the bracket from the turn signal switch to the turn signal lever.
Remove the screw that holds the knob on for the 4 way flashers.
Remove the 3 screws that hold the turn signal switch and carefully slide the switch out.
Remove the 2 screws that hold the key lock into the column and slide it out.
Remove steering wheel Remove Steering lock plate Place ignition in on position Depress lock pin now exposed. If this is not possible, drill out lock pin.
You can replace the ignition lock cylinder in your 1994 Pontiac Firebird without removing the steering will. Remove the retaining ring at the top of the ignition cylinder. The ignition cylinder will slide out.
The 1994 Pontiac Grand Am ignition lock cylinder is held in place by the retaining ring at the top of the cylinder. Remove the retaining ring. Remove the wiring harness from the back of the cylinder.
1996 rodeo- how to remove key from lock ignition?
is it a ford? push the key in further and then turn it
Replace the ignition lock cylinder.
you have to remove the steering wheel then using a lock plate removal tool depress the lock plate and removed the clip that holds it in place then remove the lock plate then remove the screws from the turn signal switch and pull it up slightly then remove the screw that hold the lock cylinder in place then remove the lock assembly
Remove the retaining ring, from the top of your 1997 Ford Astro ignition lock cylinder. Remove the wiring harness from the back of the ignition lock cylinder.
Remove the retaining ring from the top of your 2000 Mercedes-Benz ignition lock cylinder. Slide the ignition lock cylinder out and remove the wiring harness.
no the switch can be independly remove from the back side of the ignition lock
with your cox
Remove the retaining ring at the top of your Chevy S 10 ignition lock cylinder. Slide the ignition lock cylinder out. Remove the wiring harness from the back of the ignition lock cylinder. Reverse the process to install the new ignition lock cylinder.