How do you remove latex paint drips from painted siding?

Easiest way to remove vinyl letter glue from a latex painted surface?

Use Goo Gone, it will remove it.

How do you remove oil from a latex painted wall?

Use a degreaser. Test a small area first to ensure that it won't damage the latex paint also.

How do you remove alcohol stains off latex paint?

Try a Mr. Clean Magic Eraser...these work for me on everything! We removed permanent marker from a white latex painted wall! :O)

How to Paint Aluminum Siding?

You may have bought a house with aluminum siding in the past several years. One thing you should certainly know if you own one is how to paint the siding. The first step to painting the siding is determining whether or not your siding is actually made from aluminum. Steel siding can also be made from galvanized steel, and the difference may not be immediately obvious. If you do have galvanized steel siding, make sure to use a latex paint instead of an oil-based paint. The second step is to clean the siding. You need to clean it thoroughly. Use detergent with water and scrub over the surface of the entire siding thoroughly. Once you’re done, make sure to spray the entire siding with a hose. After removing all remnants of soapy suds and detergent, let the siding dry. The next step is to add a layer of primer to the siding. If the siding was indeed painted before with a latex paint, you can skip this step. Other wise, you should probably use an oil-based primer. Latex-based primer may react with the aluminum to create air bubbles that could negatively affect your paint job. Next, you should sand the siding. Only sand it lightly. If you are going to add a coat of acrylic latex to siding already painted with acrylic latex, you may be able to skip this step. Lastly, you need to add the finishing coat to your siding. The finishing coat should be acrylic latex. There are a number of ways to add this final coat, but using either a foam roller or an airless sprayer to apply the paint are probably the best options. If you use a roller, though, you may need to add two coats to give your siding good coverage. You should also add Flood Floetrol paint conditioner to the acrylic latex. This will allow the paint to dry slowly so it levels out better. After this final step, simply let it dry. You are now done. Repainting your siding will keep your house looking beautiful and will make it much more attractive to buyers if you ever wish to sell it.

Can latex caulk be painted over?

Yes

How do you remove dry latex paint from a bed-liner?

To remove latex paint from a bed-liner I would try a decent pressure washer. If you find the latex paint is not lifting from the indentations in the bed-liner then you want to ensure the surface is dry. Use Spray Nine and some elbow grease followed by a final rinse.

What dissolves latex and can be used to remove it effectively?

Acetone dissolves latex and can be used effectively to remove it.

How do you clean latex caulk from vinyl siding?

When it drys you should be able to rub it off with a rag or your finger.

Can masonite siding be painted?

I'm in the process of doing this in my bathroom. I'm sanding with 100 grit paper to knock the gloss off, then I'm going to coat it with Killz2 latex primer (ok for use with glossy surfaces, the other primers I looked at were not.) Then topcoating with Killz paint. I think it will turn out well.

Can you put latex paint over polyurethane strain that was used on T-111 type siding without priming it first?

Latex paint is an indoor paint, which will not work very well on siding; you can paint it on, but it is going to peel off pretty quickly. Use an enamel paint.

Can oil based sealer be painted over latex paint?

yes but not the other way around the latex passes moisture

How do you remove latex paint from car upholstery?

i have dried white latex paint on car seat. what do i do to remove it?