Want this question answered?
how to remove the hood of soft top grand vitara suzuki
No, it only comes in soft top
The problem is overwatering. Let the plant dry out, and remove the top layer of soil that has the mold on it. Add fresh soil on top. Watch the watering after that.
washing soft top with a mild bleach or water and vinegar will remove the mildew
Fold the soft top down, Remove 4 torx bolts from the bows and remove them from the brackets on the roll cage. Pull the entire top away from the vehicle to the rear.
you should always remove the soft top before putting on the hardtop
To remove a starter from a 2004 BMW 325ci, you need to first remove the screws from the top of the motor. You will see a tube looking device about 3 inches from the top, on the left. This needs to be unscrewed, and the wires should come out with it.
Begin by removing the retaining ring at the top of your 1998 BMW ignition switch. The ignition switch will slide out. Remove the wiring harness.
nope, you have to remove the hard top first.
stop being a bum and take to a place
Yes.. the body already has the mounting holes for the top. I originally bought my Jeep with soft top and then got a used hardtop. No issues - just be sure to remove the soft top mounting hardware.
TJ's are probably the easiest, remove the soft top completely, ( unbuckle top from windshield rail, and remove bows from rollbar with torx wrench ) remove the door surrounds ( if you have solid doors, tork bolts from the top through the rollbar ) remove the rails at the back that hold your rear window, and slap that hard top on there, it buckles down in the front just like your soft top, and there are bolt holes where the top meets the sides to secure it to the vehicle, I do this several times a year, easy as pie.