Hacksaw
pipe between the catalic converter and muffler
Yes.
un hook the hanger by the muffler then remove the hanger at the point where the pipe bends infrint of the gas tank then the hanger by the cat converter unbolt the mid pipe at the converter un bolt the down pipe from the header then remove the o2 sensor from the header and the egr tube from the header remove 8 bolts unbolt alternator then remove exaust system
It could be or there could be a pipe in between.It could be or there could be a pipe in between.
Between the exhaust manifold and the muffler. Follow the exhaust pipe and you will see the converter.
It is in the exhaust pipe between the engine and the muffler.
Heres how i eventually did it ... 1. Using needle nose locking pliers i held the pipe to the muffler so that it wouldnt get knocked back into the muffler. 2. Then using a cold chisel i made a gap between the muffler (the part that houses the pipe) and the pipe. I did this so that the pipe could be cut through without also cutting the muffler. 3. Then using a power saw with a metal cutting blade i cut through the tailpipe. 4. Then I was the able to crimp the edges of the pipe up and pull it out. 5. Have a beer for a job well done !!!
probably catalytic converter
It's part of the exhaust pipe, between the muffler and the engine.
Crawl under the vehicle and find the exhaust pipe coming from the engine. It will connect to the catalytic converter and from there to the muffler.
the catalytic converter is on the exhaust pipe before the muffler . looks like a smaller version of one.
It really depends on what it needs. Is it just a muffler? An Intermediate Pipe? Front Engine pipe? Converter? If it only needs a muffler... $200. If it needs a muffler and Intermediate pipe...$400. Best to have it looked at to be sure. PaulMidas of Dartmouth