Want this question answered?
Remove the oil breather cap on one of the valve covers and pour the oil through the hole in the valve cover.
Does it have a chrome plated gas cap on the rear of the vehicle
With the car running and level loosen the Allen bolt in bottom of the trans pan, if nothing comes out then remove the breather cap on the left front of the trans just above the pan and add fluid until it comes out the hole the Allen bolt was removed. Reinstall the Allen bolt and breather cap. Breather cap fits tight but just pulls off.
Cap on valve cover or remove breather if aftermarket (don't remove cover) just get it inside either one and you will be ok.
Remove the crankcase breather cap up in front of the engine and add motor oil down the tube.
There should be a cap on the drivers side valve cover. If not, remove the breather tube and use a funnel at the passenger side valve cover.
in the bell housing.
Should be a cap or breather on the valve cover. In through there.
There will be a removable cap, or breather on the valve cover.
# 1 on the distributor cap faces AWAY from the engine
Remove the breather cap at rear of tractor, on the left side of the PTO it pulls straight out. It has a dipstick on it. You should be able to add fluid there as well.
That should be the crankcase breather tube.