you have to take , unbolt the exhaust pipe with torque first. then remove the pan
remove the differential. it has 5 17 mm nuts around the diff. then
In the oil pan
Drain the oil from your oil pan. Remove the oil pan bolts. There are 24 oil pan bolts. The oil pan will come off.
Hello, The following is a procedure on removing and installing the oil pan on a 1997 Acura CL 3.0: 1. Raise and safely support the vehicle 2. Drain the engine oil into a suitable container. 3. Remove the exhaust pipe if necessary. 4. Unfasten the oil pan mounting bolts, then remove the oil pan. 5. Clean the sealing surface on the engine and oil pan flange. 6. Apply a bead of sealant to the oil pan flange and install the oil pan. Tighten the bolts to 104 inch lbs. (12 Nm) 7. If removed, install the exhaust pipe. 8. Add the correct amount of engine oil to the crankcase. 9. Start the engine and check for leaks. I hope this helps you out!
Remove the oil pan, remove the pump, and replace it.Remove the oil pan, remove the pump, and replace it.
Remove the transmission oil pan Remove the transmission oil pan Remove the transmission oil pan
You remove the bolts to the oil pan and the pull the oil pan off and the gasket.
Inside the transmission - remove transmission oil pan - should be secured by 2 short bolts
The oil pan on a 1995 Acura Legend is changed by draining the oil, removing the retaining bolts, and lowering it from the engine. The components are then cleans, a new gasket installed, and the pan bolted back in place.
Drain the oil from your 1996 Chevy Lumina oil pan. Remove the oil pan retaining bolts. The oil pan will come off.
Drain the oil from your 1995 Chevrolet oil pan. Remove the oil pan retaining bolts. The oil pan will come off.