VW Passat

How do you remove oil pump from a 99 VW Passat 1.8T?

345

Top Answer
User Avatar
Wiki User
Answered
2012-09-08 02:16:56
2012-09-08 02:16:56

how to remove oil pump for 99 vw passat.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


Remove the oil pan, remove the pump, and replace it.Remove the oil pan, remove the pump, and replace it.

Remove the oil pan. The oil pump will be visible. Remove the oil pump pickup to. Remove the oil pump retaining bolts. Reverse the process to install the new oil pump.

The oil pump is located in the oil sump/pan and driven by a chain attached to the crankshaft.

Remove the oil pan. The oil pump will be visible. Remove the retaining bolts from the oil pump. Reverse the process to install the new oil pump.

Drain the oil from the oil pan and remove it. Remove the oil pump retaining bolts. Reverse the process to install the new oil pump.

Drain the oil from the oil pan. Remove the oil pan. Remove the oil pump retaining bolts. Reverse the process to install the new oil pump.

Depending on the engine: (According to Haynes Repair Manual) 3.0L - the oil pump is located in the oil pan. You'll have to remove the oil pan, then the oil pump mounting bolt. Lower and remove the oil pump assembly (the oil pump intermediate shaft will come down with the pump). 3.8L - The oil pump is mounted in the oil pump cover/oil filter adapter. The oil pump intermediate shaft is mounted to the timing chain by a clip (I have a 3.0L, so I haven't seen this). You'll have to remove the oil filter, then the oil cooler assembly. Remove the oil pump/oil filter adapter from the front cover (inspect the oil pump gear pocket). Remove the oil pan, the pickup tube bracket nut, and two mounting bolts to remove the oil pump pickup, then lower and remove the pickup. This is probably more info than you wanted, but there you go.

Drain the oil from the oil pan. Remove the oil pan by removing the oil pan bolts. Remove the oil pump retaining bolts. Reverse the process to install the new oil pump.

You have to remove the oil pan to get at the oil pump.

The oil pump is located near the bottom of the engine. Remove the oil pan from the engine. Remove the retaining bolts to the oil pump. Reverse the process to install the new oil pump.

Have to remove the oil pan to get to the pump.

Could be worn bearings [cam or main] a weak oil pump pressure relief valve or a weak oil pump

The oil pump is located on the bottom of the engine. Drain the oil from the oil pan. Remove the oil pan. Remove the oil pump retaining bolts. Reverse the process to install your new oil pump.

Remove the oil pan and then remove the timing chain cover. Remove the timing chain and tensioners. There will be four bolts to unscrew. After removing these bolts you can remove the oil pump. Replace it with your new oil pump and repeat the steps backwards.

Drain the oil from your 1995 Chevy Lumina oil pan. Remove the oil pan retaining bolts. Remove the oil pump retaining bolts. Reverse the process to install your new oil pump.

Drain the oil from your Chevy oil pan. Remove the oil pan retaining bolts. Remove the oil pump retaining bolts. Reverse the process to install your new oil pump.

You will need to begin by draining the oil from your 1996 Mercury Villager oil pan. Remove the oil pan. Remove the oil pump retaining bolts. Reverse the process to install the new oil pump.

Drain the oil from your 1999 Chevy Malibu oil pan. Remove the oil pan retaining bolts. Remove the oil pump retaining bolts. Reverse the process to install your new oil pump.

Drain the oil from your 1993 Chevy oil pan. Remove the oil pan retaining bolts. Remove the oil pump retaining bolts. Reverse the process to install the new oil pump.

You need to follow the same procedure as for timing belt replacement. But in the case of the oil pump you have to remove the oil pan too. There is a strainer attached to the oil pump from the bottom you will have remove it too. Then replace the oil pump, make sure that you have replace the oil pan gasket, and oil pump gasket.

The oil pump is located in the oil pan. Disconnect the battery. Remove the starter. Unbolt the sub frame and remove. The pan can now be dropped giving access to the oil pump.

Begin by training the oil from your 1990 VW oil pan. Remove the oil pan retaining bolts. Remove the oil pump retaining bolts. Reverse the process to install your new oil pump.

Begin by removing the oil from your 2002 Chrysler Sebring oil pan. Remove the oil pan retaining bolts. Remove the oil pump retaining bolts. Reverse the process to install your new oil pump.

Drain the oil from the oil pan. Remove the oil pan. Unbolt the old oil pump. Reverse the process to install the new oil pump.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.