With a masonry chisel. It may be easier to cover it with a new surface.
fresco
Try a heavy coat of primer/sealer. The primer should condition and adhere to your plaster walls. Once the primer sets up (dries) you can then apply anything you want to those walls.
A Fresco
Masons tipsI have had better luck with the poured ones afetr the forms have been taken off. Making sure as the concrete is poured/pumped into the wasll to use a concrete vibrater to remove air which will result in hollow spots and cracking.You can finish the walls easily with Grout,cement,or a type of mortar that has less shrinkagee but this type hardens quickly, so have your mason ready with sponge floats /hand floats,Masons hammer,protective gear for eyes, hands,rubber boots, to prevent exsposure to the wet cement that will cause a chemical burn.
I'm not sure, but I think its called affresco, said fresco in English.
Masonry nails have very small heads, and are notoriously difficult to remove from plaster, concrete, and wooden walls. The best way to remove them, without removing the plaster, is to cut the head off so that it is flat to the wall. Then, fill in the hole and repaint, if necessary.
Termites burrow into concrete block walls. Termites live in many types of structures. In addition to walls they also live in baseboards and slabs.
The standard concrete building block for load-bearing walls is 8 x 8 x 16
It depends on the application. For homes, masonry is fine as long as it is insulated well against the weather. Masonry rarely needs maintenance. Concrete walls are stronger and last longer than masonry but are more costly to construct. For basement walls, I suggest that you always use concrete walls. Above ground level, masonry is cheaper and strong enough for residential and commercial, multi-story applications. For retaining walls, 8" thick masonry works well up to about 8 feet of retained earth. Above that, the lower courses of block will get thicker to 12". You still need concrete footings for block walls.
concrete nail
That's sort of a strange question. A concrete slab is a horizontal surface -- it's meant to be a surface you stand on or build things on. Concrete blocks are usually used for vertical surfaces -- walls. I believe that poured concrete walls are more expensive than concrete block walls. You wouldn't use concrete blocks as a substitute for a concrete slab.
The japanese put white plaster on the walls because it is fireproof
You drain the water then plaster the walls from inside
Prior to stuccoing the CBS you can install metal mesh or REBAR
Very thick earthen, rock, or concrete walls. Or, lead or gold shielding.
does it cover repairing plaster walls and repainting and fixng plumbing
A detailed explanation of the sizing of modular concrete blocks for retaining walls and other projects is in the related links.