Want this question answered?
Remove the belt from your 1992 Chevy Lumina power steering pump. Remove the power steering pump hose. Remove the power steering pump retaining bolts. Reverse the process to install the new power steering pump.
The intermittent power window module for your 1996 Chevy Lumina can be found inside of the driver door. You will need to remove the door panel in order to access the power window module.
Wire, Switch, Motor, window regulator.
There is an electrical problem with the switch or wiring. Have it checked out/
you should be able to take the cover off the driver's door by unscrewing it,then unplug the window switch and replace it,fairly easy..
It should a have fuel pump relay located under the hood in the power distribution box. If your looking for an inertia kill switch it doesn't have one.
Remove switch panel and jump wires on switch- if this works bad switch Remove door panel and see if the motor is getting power-if it is getting power, bad motor
Neutral switch Starter solenoid Starter Loose or dirty battery cable
Rack and Pinion with power assist.
On top of the power steering pump dummy
remove door panel check to see if you are getting power and ground to motor. If so, bad motor--if no power to motor, check to see if you have power to switch if so ,bad switch--if not bad power feed to switch close but if the switch not on, you never get power to the motor.
Check to make sure there is power going to your coils from your ignition switch.