Piece of cake - Pop the switch assembly out using a mini pry bar from the bottom end of the switch assembly. Unplug connector which has a tab that needs to be squeezed in.
Remove the decorative cover to the window switch panel. Remove the window switch retaining screws. Remove the wiring harness from the back of the window switch. Reverse the process to install the new window switch.
try removing switch, and jumping the wires, this should raise window with out pulling door apart
Based on symptom: switch or motpr Based on Nissan: switch Replace Nissan window switches frequently lest you be caught open in the rain.
you can take the panel off the door and find the wires going to the power window motor. Take a car battery or charger and hook it up to the wires at the motor. if the window goes up or down then it is probably the switch. If it does nothing reverse the hookup. If it still does nothing it may be your motor. Hooking it up one way will move the window up and reversing it , it will go down.
HIT IT WITH A MALLEt
Remove the door panel. Remove the switch retainer. Remove the wiring harness. Reverse the process to install the new switch.
Look in between the hazard light switch and the rear window defrost switch. there should be a cover you can pry up with a flat head screwdriver. remove that and the screw that is underneath it. Then remove the bezel that covers the radio and a.c controls. There will be wires attached to the hazrd light switch and the defrost switch. remove the connectors that connect them. then there are four screws holding in the radio just remove those and slide the whole thing out.
ow do I access window switch on a 99 mercury willager?
The 1994 Nissan Maxima window motor fuse can be found in the fuse box under the hood. The window motor fuse will simply unplug.
theres a C clip on there, if u look closely ull notice which way it comes off when u do.. get like a thin rag of something and wedge it in there and it should come off easily
Replace the entire windwo rubber or put soom Gook in the leak. You have to find the leak.
Remove the interioer trim and you will find two nuts to remove and the whole window trim and all will come out as you break the seal of the black gooie stuff.