You have to take the two bolts off of the arm then the whole rotor comes off its a size 18mm ned a half inch breaker bar and a pipe is helpful they are stubborn!!
You will need to remove the tire and wheel of your 1998 Oldsmobile. Remove the brake pad assembly. Tap on the brake rotor with a hammer or mallet. Slide the brake rotor off. Reverse the process to install the new rotor and pads.
Remove wheel. Hold brake disk with screwdriver through the brake caliper opening. Removed drive shaft nut. Remove the caliper then rotor. Remove electrical connector from speed sensor(attached to bearing). Remove three bolts securing bearing assembly.
Remove wheels Re-install 2 lug nuts to hold rotor in place Remove caliper mounting bolts Slide caliper off rotor Fully retract piston into caliper body usuing a "C" clamp Replace pads inner and outer Re-Install caliper pump brake pedal to set pads against rotor prior to moving vehicle
2005 Toyota tacoma how to remove the brake rotor
Remove the tire and wheel from your 1995 Chevy. Remove the brake assembly. Tap on the brake rotor with a mallet or hammer. The brake rotor will slide off.
Remove the brake caliper and hang it out of the way, then thread 2 8 mm bolts into the holes provided on the disk. Screw them in and the brake rotor will come off.
You remove the brake caliper frame and rotor is then loose.
Remove the wheel and tire assembly and the brake caliper then the brake rotor will slide right off.
Remove the tire and wheel from your 1995 Chevrolet K 3500. Remove the front brake assembly. Tap on the brake rotor with a hammer or mallet until it becomes loose. Slide the brake rotor off.
How do you remove the rear brake rotor on a 2005 Dodge Ram 2500?
Remove the tire and wheel. Remove the brake pad springs and hardware. Remove the brake rotor. Reverse the process to install the new brake and rotor.
Remove the wheel, remove the brake caliper and the caliper adapter bracket, pull the rotor off of the wheel studs.