i think you will need a drum puller and some heat.i havent worked on them for 20 plus years.i think that's how i did it
How do you remove rear brake drum from a 1993 Toyota pickup?
How do you remove the rear drum brakes on a 1998 ford escort
how do you remove rear brake drum on a suzuki 2004 xl7
how to remove rear brake drum on 1994 cavalier
No, but the drum is usually stuck to the hub.
To remove the drum, beat it mercilessly with a very large hammer.
To remove a rear brake drum on a Chrysler, first ensure the vehicle is safely elevated and secured on jack stands. Remove the wheel, then locate and remove any retaining screws or clips securing the drum. If the drum is stuck, gently tap it with a hammer or use a brake drum puller to loosen it. Once free, slide the drum off the hub to access the brake components.
The first step is to remove the tire. The rear brake drum will have what is known as a self-adjusting screw. This may need to be adjusted to pull the drum off, once you have the tire removed.
To remove the rear brake drum from a 2002 Mitsubishi Lancer, start by loosening the lug nuts on the rear wheel and then lift the vehicle and secure it with jack stands. Remove the wheel, then locate the brake drum. If the drum is stuck, tap around the edge with a hammer to loosen it. Finally, pull the drum straight off the hub, ensuring any retaining clips or hardware are removed beforehand.
To remove the rear drum on a 1994 Geo Tracker, start by loosening the wheel lug nuts and raising the vehicle securely on jack stands. Remove the wheel, then locate and remove the two retaining screws holding the drum in place. If the drum is stuck, tap it gently with a hammer or use a drum puller. Once removed, you can access the brake components for inspection or replacement.
You must remove the center dust cap then remove the spindle nut. You need to tap the drum with a rubber mallet to remove it.
To remove the rear brake drum on a 2002 Pontiac Grand Am, first ensure the vehicle is safely lifted and secured on jack stands. Remove the wheel and tire, then locate the drum's retaining screws, if present, and remove them. Use a brake drum puller if necessary to avoid damaging the drum, then gently pull the drum off the wheel hub. If the drum is stuck, you may need to adjust the brake shoes inward by accessing the adjuster through the inspection hole on the backing plate.