Want this question answered?
you get a towel and clean
There two holes in the drum that two standard 8mm bolts goes into. Tighting those bolts will push the drum off.
I need a diagram of ford F350 drum brakes on 1996 model 460 engine 4 wheel drive
Brake problem. Remove the rear wheel & brake drum, and inspect the brake components. You may have a leaking wheel cylinder or other problem. Also inspect the wheel bearing.
On the drum there is 2 threaded holes. Take 2 bolts and thread them into the holes, until the cover comes off.
NO. I had a 96 and it had drum brakes. I believe the rear disk brakes started in 1998 for the Blazers.
You gotta remove the bearing cover do the brakes and repack it with the recommended fluid/grease good luck to ya
Remove bolts at center hub Slide axle out Remove spanner nut drums should slide off
A Different Drum was created in 1996.
how do you remove the drum the wheels are off
Adjust the brakes shoes inward to allow room to just pull the drum off.
remove the wheel and wack it with a rubber hammer or sumthin of that sort and pull it off nothing holds it there but the wheel but after time they take a little insinuate to get off