answersLogoWhite

0

On the drum there is 2 threaded holes. Take 2 bolts and thread them into the holes, until the cover comes off.

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

How do you fix a leak in a 2003 Chevy Tracker?

you go to a mechanic :)


Does a 2003 Chevy Tracker have a timing chain or belt?

Chain


How many quarts are needed for 2003 Chevy Tracker 2.0L?

5 quarts.


Where is fuel filter located on a 2003 Chevy Tracker?

above the gas tank in the rear of the truck.....you have to get under the tracker to get to it. its easy to change :)


How many miles can you expect on a 2003 Chevy Tracker engine?

with regular oil changes I've got 250,000 + on my 98 tracker


Where does the flasher relay get installed in a 2003 Chevy Tracker?

In a 2003 Chevy Tracker, the flasher relay is typically installed in the fuse box located under the dashboard on the driver's side. You may need to remove a cover to access the relay. It's usually a small, rectangular component that can be pulled out and replaced if necessary. Always refer to the owner’s manual for specific details on the location and installation process.


How do you remove a horn from a 2003 Chevy surban?

why


What is the proper psi setting for P205 75R15 tires on a 2003 Chevy Tracker?

The proper psi setting for P205 75R15 tires on a 2003 Chevy tracker is stamped on the sidewalls near the tire size number and it may not be the same PSI from one brand (as Michelin) to another (Bridgestone).


Where do you plug in a code reader for Chevy Tracker 2003?

To plug in a code reader for a 2003 Chevy Tracker, locate the OBD-II (On-Board Diagnostics) port, which is typically found under the dashboard, near the driver's side, just above the pedals. You may need to remove a small cover to access it. Once you find the port, simply connect the code reader to it, and you can begin diagnosing any issues with the vehicle.


How do you replace air conditioner compressor on a 2003 Chevy Tracker?

To replace the air conditioner compressor on a 2003 Chevy Tracker, first, ensure the vehicle is off and disconnect the battery. Next, relieve the refrigerant pressure and remove the refrigerant lines from the compressor. Then, unbolt the compressor from its mounting bracket and disconnect the electrical connector. Install the new compressor in reverse order, ensuring to recharge the AC system with the appropriate refrigerant afterward.


2003 Chevy Tracker 2.0 liter crank sensor location?

on back of engine behind the flex plate.


How do you remove the dashboard on a 2003 Chevy Cavalier?

How to remove the dash board in a 2003 Chevy Cavalier. Center A/C vents not working and it squeaks all the time.